Keep Labeling Away From Dust And Improve Product Labeling Quality

Increase the viscosity of the label and make the label stick firmly. To achieve this effect, we need to consider the following aspects:

①Improve the surface quality of the applied hose. Most products have varnish on the surface, which will increase the difficulty of labeling. Exudation of the contents, micro-holes in the pipe wall, etc. will cause the label to warp. How to avoid such problems should be considered by everyone A more important question.

② Control the labeling pressure of the label during the labeling process.

③Control the temperature during labeling. Increasing the labeling temperature will improve the labeling effect, because as the temperature increases, the activity of the substance inside the object will increase, and the label will more easily fuse with the tube.

The labeling process is prone to static electricity, which will affect the labeling effect. Properly increasing the humidity at the labeling site will improve to some extent. The use of ion fans is also an effective solution. There is automatic humidity control inside the labeling machine, and the cleanliness inside the equipment can be controlled separately to keep the label away from dust and improve the labeling quality of the product. In this way, there is no longer the phenomenon of warping in the labeling process, and the visual effect is achieved.

Make the bottom end of the label arc-shaped, and try to avoid the deformation area of the seal. Of course, the arc cannot be opened too deep, otherwise wrinkles are easily caused due to the problem of the label itself, adding unnecessary trouble. For the special-shaped sealing, the shape of the label needs to be changed accordingly. This can not only avoid warping, but also increase the aesthetics.